Free TranslationFree Translation
Synonyms, antonyms, pronunciation

  Home
English Dictionary      examples: 'day', 'get rid of', 'New York Bay'




Bevel   /bˈɛvəl/   Listen
noun
Bevel  n.  
1.
Any angle other than a right angle; the angle which one surface makes with another when they are not at right angles; the slant or inclination of such surface; as, to give a bevel to the edge of a table or a stone slab; the bevel of a piece of timber.
2.
An instrument consisting of two rules or arms, jointed together at one end, and opening to any angle, for adjusting the surfaces of work to the same or a given inclination; called also a bevel square.



verb
Bevel  v. t.  (past & past part. beveled or bevelled; pres. part. beveling or bevelling)  To cut to a bevel angle; to slope the edge or surface of.



Bevel  v. i.  To deviate or incline from an angle of 90°, as a surface; to slant. "Their houses are very ill built, the walls bevel."



adjective
Bevel  adj.  
1.
Having the slant of a bevel; slanting.
2.
Hence: Morally distorted; not upright. (Poetic) "I may be straight, though they themselves be bevel."
A bevel angle, any angle other than one of 90°.
Bevel wheel, a cogwheel whose working face is oblique to the axis.






Collaborative International Dictionary of English 0.48








Advanced search
     Find words:
Starting with
Ending with
Containing
Matching a pattern  

Synonyms
Antonyms
Quotes
Words linked to  

only single words



Share |





"Bevel" Quotes from Famous Books



... matter to split even thin lumber into strips of uniform width by means of a handsaw, but by using the circular saw attachment, shown in Fig. 1, the operation becomes rapid and easy, and the stuff may be sawed or slit at any desired angle or bevel. The attachment consists of a saw mandrel of the usual form, and a wooden table supported by a right angled piece, A, of round iron fitted to the toolpost and clamped by a wooden cleat, B, which is secured to the under side of the table, split from the aperture to one end, and provided with a thumbscrew ...
— Scientific American Supplement, No. 312, December 24, 1881 • Various

... piece. The mender selected a piece of hand-made paper of similar texture to the old, and stained the new piece as nearly to the tint of the old leaf as possible. Then he beveled the edge of the leaf, and made a reverse bevel on the piece, and joined them ...
— The Faith Doctor - A Story of New York • Edward Eggleston

... that I am, and they that level At my abuses reckon up their own; I may be straight though they themselves be bevel." ...
— The Man Shakespeare • Frank Harris

... in bicuspids and molars, some form of metal shield, or matrix, is of great advantage, as they prevent the tin from crushing or sliding out. By driving the tin firmly against the metal, a well-condensed surface is secured; and as the metal yields a little, we can with a bevel or thin plugger force the tin slightly between the metal and the margin of the cavity, thus making sure of a tight filling, with plenty of material to finish well. After removing the metal, condense with thin burnishers and complete ...
— Tin Foil and Its Combinations for Filling Teeth • Henry L. Ambler

... finish the roof. Use the ax to bevel off the corners of the four cross-logs, A and B. (Fig. 6.) Then get a lot of strong poles, about five feet long, and lay them close together along the two sides of the roof till it is covered with poles; putting a very heavy one, or small log, on the outer ...
— Boy Scouts Handbook - The First Edition, 1911 • Boy Scouts of America


More quotes...



Copyright © 2025 e-Free Translation.com